Electro Galvanized Iron Wire for Wire Mesh
Galvanized Wire is made to BS EN 10244. The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel.
Diameter Range: 0.2-5.00 mm
Surface Finish: Electro Galvanizing
Galvanised Wire Working Specifications
Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between tensile strength.
Standard Galvanized Wire is manufactured to comply with the following diameter tolerances:
Minimum Coating Mass (g/m2)
over 0.6mm up to and incl. 0.65mm
over 0.75mm up to and incl. 0.85mm
over 0.85mm up to and incl. 0.95mm
over 0.95mm up to and incl. 1.06mm
over 1.06mm up to and incl. 1.18mm
over 1.18mm up to and incl. 1.32mm
over 1.32mm up to and incl. 1.55mm
over 1.55mm up to and incl. 1.80mm
over 1.80mm up to and incl. 2.24mm
over 2.24mm up to and incl. 2.72mm
over 2.72mm up to and incl. 3.15mm
over 3.15mm up to and incl. 3.55mm
over 3.55mm up to and incl. 4.25mm
over 4.25mm up to and incl. 5.00mm
Nominal Wire Diameter
over 0.80mm up to and incl. 1.60mm
over 1.60mm up to and incl. 2.50mm
over 2.50mm up to and incl. 4.00mm
over 4.00mm up to and incl. 6.00mm
over 6.00mm up to and incl. 10.00mm
Tensile Strength (Mpa)
The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:
Tensile Strength (Mpa)
Galvanised - Soft Quality
Galvanised - Medium Quality
Galvanised - Hard Quality
Please note that the sizes mentioned above are indicative only and do not specify the size range available from my products range.
A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.
We use total quality control system. Every pieces of the raw material; semi-finished products and finished products are tested and recorded in file. The tracking record is used from final products to the very first beginning raw material steel factories.
Third Part like SGS is available for test control before shipment
1) All the products are packed with seaworthy packing.
2) Customer’s special requirement for packing can be satisfied.
3) Air freight; sea freight and truck freight are all available.
Q: Manufacturer or Trader?
A: We are manufacturer in wire industry for more than 20 years.
Q: Producing Capacity?
A: The producing capacity totally is 9, 000 tons per month. The producing capacity of this product is 1,500 tons per month.
Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Europe, America, Canada, and South America etc.
Q: What information should I provide when inquiring?
A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour
Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.
Q: What is the payment term?
A: T/T; L/C; D/P etc
Q: Free sample available?
A: Yes. Free sample within 2kg is available
Q: Third Party Inspection available?
A: Yes, available. The charges are on the buyer.