Galvanized steel wire 3.68mm for chain link
Galvanized steel wire for chain link is a soft, heavily Zinc coated wire used in the chain link, gabion and various kinds of mesh industry protection.
Low carbon galvanized wire for chain link are produced to meet the requirements of BS EN 10244; ASTM_A_641(zinc-coated) etc. The specification can be made by customer's requirement.
The diameter of the wire is available from 1.7mm to 8.0mm and is available in either coils or stems.
Nominal Wire Diameter
over 0.80mm up to and incl. 1.60mm
over 1.60mm up to and incl. 2.50mm
over 2.50mm up to and incl. 4.00mm
over 4.00mm up to and incl. 5.00mm
over 5.00mm up to and incl. 8.00mm
Galvanised Coating Weight - AS3863; EN 10244; ASTM A 641
Minimum Ctg Mass Class 1 (g/m2)
Minimum Ctg Mass Class 2 (g/m2)
Minimum Ctg Mass Class 3 (g/m2)
Tensile Strength (MPa)
The tensile strength is defined as the maximum load achieved in a tensile test divided by the cross sectional area of the wire test piece. The tensile strength range is 448-517 MPa; 551-620 MPa; 65000psi~75000psi;80000psi~90000psi
A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.
We use total quality control system. Every pieces of the raw material; semi-finished products and finished products are tested and recorded in file. The tracking record is used from final products to the very first beginning raw material steel factories.
Third Part like SGS is available for test control before shipment
1) All the products are packed with seaworthy packing.
2) Customer’s special requirement for packing can be satisfied.
3) Air freight; sea freight and truck freight are all available.
Q: Manufacturer or Trader?
A: We are manufacturer in wire industry for more than 20 years.
Q: Producing Capacity?
A: The producing capacity totally is 9, 000 tons per month. The producing capacity of this product is 1,500 tons per month.
Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Europe, America, Canada, and South America etc.
Q: What information should I provide when inquiring?
A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour
Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.
Q: What is the payment term?
A: T/T; L/C; D/P etc
Q: Free sample available?
A: Yes. Free sample within 2kg is available
Q: Third Party Inspection available?
A: Yes, available. The charges are on the buyer.