Electro Galvanized Iron Wire for Wire Mesh

Products > Fencing and Chainlink > Electro Galvanized Iron Wire for Wire Mesh

Electro Galvanized Iron Wire for Wire Mesh

Electro Galvanized Iron Wire for Wire Mesh

Galvanized Wire is made to BS EN 10244. The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel.

Additional Info

Diameter Range: 0.2-5.00 mm
Surface Finish: Electro Galvanizing

 

Galvanised Wire Working Specifications

Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between tensile strength.

Diameter Properties

Standard Galvanized Wire is manufactured to comply with the following diameter tolerances:

Nominal     Diameter

Minimum Coating Mass (g/m2)

over 0.6mm up   to and incl. 0.65mm

25

 over   0.75mm up to and incl. 0.85mm

25

over 0.85mm up   to and incl. 0.95mm

25

over 0.95mm up   to and incl. 1.06mm

25

over 1.06mm up   to and incl. 1.18mm

30

over 1.18mm up   to and incl. 1.32mm

30

over 1.32mm up   to and incl. 1.55mm

30

over 1.55mm up   to and incl. 1.80mm

35

over 1.80mm up   to and incl. 2.24mm

35

over 2.24mm up   to and incl. 2.72mm

40

over 2.72mm up   to and incl. 3.15mm

45

over 3.15mm up   to and incl. 3.55mm

50

over 3.55mm up   to and incl. 4.25mm

50

over 4.25mm up   to and incl. 5.00mm

50

 

Nominal Wire Diameter

Tolerance (mm)

over 0.80mm up to and incl. 1.60mm

over 1.60mm up to and incl. 2.50mm

over 2.50mm up to and incl. 4.00mm

over 4.00mm up to and incl. 6.00mm

over 6.00mm up to and incl. 10.00mm

+/-0.03

+/-0.03

+/-0.03

+/-0.03

+/-0.03

 

Tensile Strength (Mpa)

The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:

 

Grade

Tensile Strength (Mpa)

Galvanised - Soft Quality

Galvanised - Medium Quality

Galvanised - Hard Quality

380/550

500/625

625/850

Please note that the sizes mentioned above are indicative only and do not specify the size range available from my products range.

 

Steel Chemistry

A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.

 

Tensile Grade

% Carbon

% Phosphorus

% Manganese

% Silicon

% Sulphur

Soft

Medium

Hard

0.05 max

0.15-0.19

0.04-0.07

0.03 max

0.03 max

0.03 max

0.05 max

0.70-0.90

0.40-0.60

0.12-0.18

0.14-0.24

0.12-0.22

0.03 max

0.03 max

0.03 max

 

Quality Control:

We use total quality control system. Every pieces of the raw material; semi-finished products and finished products are tested and recorded in file. The tracking record is used from final products to the very first beginning raw material steel factories.

Third Part like SGS is available for test control before shipment

 

Packing:
1) All the products are packed with seaworthy packing.
2) Customer’s special requirement for packing can be satisfied.
3) Air freight; sea freight and truck freight are all available.

 

FAQ

Q: Manufacturer or Trader?
A: We are manufacturer in wire industry for more than 20 years. 

Q: Producing Capacity?
A: The producing capacity totally is 9, 000 tons per month. The producing capacity of this product is 1,500 tons per month.

Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Europe, America, Canada, and South America etc.

Q: What information should I provide when inquiring?
A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour

Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.

Q: What is the payment term?
A: T/T; L/C; D/P etc

Q: Free sample available?
A: Yes. Free sample within 2kg is available

Q: Third Party Inspection available?
A: Yes, available. The charges are on the buyer.

Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit