Products > Steel Wire For Automotive Systerms > Phosphated Steel Wire for CAR SEAT

Phosphated Steel Wire for CAR SEAT

Phosphated Steel Wire for CAR SEAT

Hard Drawn Low Carbon Wire has been cold drawn to the required diameter and heat treatment is available. Often used for plating, redrawing and coating, it is important that the surface finish of the wire is clean and smooth. It will take moderate bending or flattening, machine ability is fair and the wire can be roll threaded.

This is a general purpose manufacturing wire suitable for a large range of applications. Various applications include super market trolleys, shelving, baskets, racks, hooks and general automotive parts.

Additional Info

Diameter Range: 1.60-12.50 mm

Hard Drawn Low Carbon Wire Specifications

Diameter Properties

Hard Drawn Low Carbon Wire is manufactured to comply with the following diameter tolerances:

Nominal Wire Diameter

Tolerance (mm)

1.60mm up to   and incl. 1.80mm

+/- 0.02

over 1.80mm up   to an incl. 2.80mm

+/- 0.03

over 2.80mm up   to and incl. 5.00mm

+/- 0.03

over 5.00mm up   to and incl. 8.00mm

+/- 0.03

Tensile Strength (MPa)

The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test. The tensile strength developed depends on the amount of reduction in area to the finished size. Tensile is not considered of prime importance to this product however the following table is given as a general guide:

 

  Nominal Wire   Diameter

Tensile Range (Mpa)

less than or     equal to 1.75mm

800/1100

over 1.75mm     up to and incl. 2.00mm

750/1050

over 2.00mm     up to and incl. 2.24mm

700/1000

over 2.24mm     up to and incl. 2.70mm

650/950

over 2.70mm     up to and incl. 2.80mm

600/900

over 2.80mm     up to and incl. 4.20mm

550/850

over 4.20mm     up to and incl. 10.00mm

500/800

over 10.00mm     up to and incl. 11.50mm

450/750

over 11.50mm     up to and incl. 12.50mm

500/800

Steel Chemistry

Use a variety of steel grades to manufacture its Hard Drawn Low Carbon range. The table below is indicative only of steel chemistries used.

-

HDLC

Truform

Hiform

% Carbon

0.04 - 0.07

0.05 max

0.06 max

% Phosphorus

0.03 max

0.03 max

0.04 max

% Manganese

0.40 - 0.60

0.50 max

0.25 - 0.50

% Silicon

0.12 - 0.22

0.12 - 0.18

0.05 max

% Sulphur

0.03 max

0.03 max

0.04 max

 

Quality Control:

We use total quality control system. Every pieces of the raw material; semi-finished products and finished products are tested and recorded in file. The tracking record is used from final products to the very first beginning raw material steel factories.

Third Part like SGS is available for test control before shipment

 

Packing:
1) All the products are packed with seaworthy packing.
2) Customer’s special requirement for packing can be satisfied.
3) Air freight; sea freight and truck freight are all available.

 

FAQ

Q: Manufacturer or Trader?
A: We are manufacturer in wire industry for more than 20 years. 

Q: Producing Capacity?
A: The producing capacity totally is 9, 000 tons per month. The producing capacity of this product is 1,500 tons per month.

Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Europe, America, Canada, and South America etc.

Q: What information should I provide when inquiring?
A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour

Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.

Q: What is the payment term?
A: T/T; L/C; D/P etc

Q: Free sample available?
A: Yes. Free sample within 2kg is available

Q: Third Party Inspection available?
A: Yes, available. The charges are on the buyer.


Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit